User's Manual
Table Of Contents
- Related Manuals
- Equipment Approvals
- System Configuration and Part Numbers
- Warnings
- Important Two-Component Material Information
- Glossary of Terms
- Overview
- EasyKey Display and Keyboard
- Run Mode Screens
- Setup Mode
- ProControl 1KS Integration Specifics
- System Operation
- Meter Calibration
- Color Change
- Alarms and Warnings
- Alarm Troubleshooting
- Schematic Diagrams
- Technical Data
- Graco Standard Warranty
- Graco Information
ProControl 1KS Integration Specifics
50 3A1080C
Automation Flow Charts
Start Mix Mode Process
See FIG. 62, Table 5, and Table 6.
F
IG. 62. Start Mix Mode Process Flow Chart
Start Mix
Mode Process
Is Mix Ready
bit = 1?
Must be Alarm Condi-
tion or Active Recipe
61. See Alarm Pro-
cessing on page 54,
or Startup from Recipe
61 (see NOTE below)
Set Mix bit = 1
Is Mix Active
bit = 1?
ProControl 1KS in Mix
Mode (Complete).
Mix Active = 1 while
the ProControl 1KS is
in Mix mode
YESNO
NO
YES
NOTE: At power up the system
defaults to Recipe 61, which is
not a valid recipe number. Initiate
a color change to Recipe 0 or a
valid recipe number (1-60).