User's Manual

Product Configurator
4 3A0987K
Product Configurator
This system can be ordered with many different options as shown in the configurator below.
The following table applies to the PD44 configurations and indicates all of the options available for each letter shown
above.
PD44 C-A-BCD-EFG- H - I -J-K-L-M-NO-P-Q-RS-T-U-V-W- X
Configurator Series Level Base Unit High Volume Rod Material, Size Low Volume Rod Material, Size High Volume Spool Low Volume Spool Outlet Nose Mixer Controls Power Cord High Volume Feed High Volume Feed Hose High Volume Feed Options Low Volume Feed Low Volume Feed Hose Low Volume Feed Options Vacuum Pump(s) Bench Stand Seal Lubricant
Code A Part Base Unit
A 964000 Micrometer PD44
B 964001 Linear Resistive Transducer PD44
C 964002 Motor Driven PD44
Code B Part High Volume Rod Material
NOTE: See code CD for last two digits of part number
A 9641__ Hardened Steel
B 9642__ Stainless Steel, UHMW
C 9643__ Tungsten Carbide, UHMW
Code
CD Part High Volume Rod Size
NOTE: See code B for first four digits of part number
01 ____01 1.25 mm rod diameter
02 ____02 1.38 mm rod diameter
03 ____03 1.50 mm rod diameter
04 ____04 1.63 mm rod diameter
05 ____05 1.75 mm rod diameter
06 ____06 2.00 mm rod diameter
07 ____07 2.13 mm rod diameter
08 ____08 2.25 mm rod diameter
09 ____09 2.38 mm rod diameter
10 ____10 2.50 mm rod diameter
11 ____11 2.63 mm rod diameter
12 ____12 2.75 mm rod diameter
13 ____13 3.00 mm rod diameter
14 ____14 3.13 mm rod diameter
15 ____15 3.25 mm rod diameter
16 ____16 3.38 mm rod diameter
17 ____17 3.50 mm rod diameter
18 ____18 3.63 mm rod diameter
19 ____19 3.75 mm rod diameter
20 ____20 4.00 mm rod diameter
21 ____21 4.25 mm rod diameter
22 ____22 4.50 mm rod diameter
23 ____23 4.63 mm rod diameter
24 ____24 4.75 mm rod diameter
25 ____25 4.88 mm rod diameter
26 ____26 5.00 mm rod diameter
27 ____27 5.13 mm rod diameter
28 ____28 5.25 mm rod diameter
29 ____29 5.50 mm rod diameter
30 ____30 5.75 mm rod diameter
31 ____31 6.00 mm rod diameter
32 ____32 6.13 mm rod diameter
33 ____33 6.25 mm rod diameter
34 ____34 6.38 mm rod diameter
35 ____35 6.50 mm rod diameter
36 ____36 6.63 mm rod diameter
37 ____37 6.75 mm rod diameter
38 ____38 7.00 mm rod diameter
39 ____39 7.25 mm rod diameter
40 ____40 7.50 mm rod diameter
41 ____41 7.63 mm rod diameter
42 ____42 7.75 mm rod diameter
43 ____43 7.88 mm rod diameter
44 ____44 8.00 mm rod diameter
Code E Part Low Volume Rod Material
NOTE: See code FG for last two digits of part number
A 9641__ Hardened Steel
B 9642__ Stainless Steel, UHMW
C 9643__ Tungsten Carbide, UHMW