User's Manual

ManualsBrandsGraco ManualsAutomatic Lubrication SystemsGraco 3A0528E G3 Illuminated Remote Run Kit

1

2

3

3A0528E 3

5-Wire CPC Power Cable

1. Power up G3 and enter

Setup Mode by pressing

both the UP and DOWN

ARROW buttons together

for 3 seconds.

2. Button will flash green.

3. Press Reset button exit test.

Testing Manual Run

Press remote run button and verify light turns green and

unit has entered the lube cycle.

Validating Color Function

Tri-Color

Remote

Illumination

Standard

Remote

Illumination

Unit in OFF Mode Off Off

Unit in ON Mode Green Green

Warning Condition Yellow

Toggles On and

Off once per

second

Fault Condition Red

Toggles On and

Off once per

second