User's Manual

Troubleshooting
3A0418E 17
Grease dispensing too slowly
Average ambient temperature
too low for activator type
Select a different activator
type
Use a temperature indepen-
dent lubricator for dispensing
Resistance to grease flow too
high
Manually purge point to
ensure that grease can be
freely received by bearing.
Reduce grease line length
and/or increase line diameter
Eliminate restrictions caused
by small orifice fittings
Install a new lubricator with a
faster activator type installed
Select grease with better
pumpability
Counter pressure is too high Check lubrication point
Wrong activator screw
Install a new lubricator with a
faster activator type installed
Malfunction Possible Cause Solution