User's Manual

Changing the Lubrication Canister
3A0418E 15
Canister Installation
1. Remove lubrication plug (A) (FIG. 11).
2. Tightly screw the lubricator into the lubrica-
tion point by hand - tools are not necessary
(FIG. 12).
3. Once installed, the lubricator should be
inspected periodically.
Changing the Lubrication
Canister
1. At the end of the lubrication period, the pis-
ton (red in all models) is clearly visible.
2. Unscrew lubrication canister and remove
from grease port.
3. Manually purge the bearing to ensure the
lubrication conditions have not changed.
Disposal
Dispose of hazardous fluid in approved con-
tainers, and according to applicable guide-
lines. Read the MSDS to know the specific
hazards of the fluids you are using.
Storage
When lubricators are not immediately installed,
they must be stored in a dry, dust free, sunlight
protected room, indoors.
FIG. 11
FIG. 12
A