User's Manual

Installation and Setup
3A0417D 9
Installation and Setup
Pin Assignment
Pressure Relief Procedure
1. Cover lubrication point (A) and lubricator
(B) with a heavy rag to absorb any fluid that
may leak out while loosening the adapter.
2. Carefully unscrew support adapter (D) from
the lubrication point (A).
A Lubrication Point
B Lubrication Canister
CDrive Unit
D Support Adapter
Determining Correct Mounting
Method
NOTE:
• Direct mounting should be used for lubrica-
tion points that are easily accessible.
• Remote mounting is recommended if you
answer YES to any of the questions below.
1. Is the ambient temperature at the lubrica-
tion point higher than +50°C (122°F)?
2. Is it necessary to remove protective
screens, walls or other types of protection
in order to reach the lubrication point?
3. Is the lubrication point exposed to high
vibrations?
4. Is it difficult to access the lubrication point
during operation of the machine?
5. Is the lubrication point exposed to any of
the following:
• water jets for high-pressure cleaning
machines?
• corrosive chemicals?
• extreme temperature?
• falling materials?
Pin
Assignment
Cable
Color Signal
1 brown current +
2 white LED green digital
3 blue current -
4 black LED red digital
4
3
1
2
A
B
D
C