User's Manual

Operation
3A0294G 63
Sequence Mode
Sequence mode dispenses a sequence of shots in a
specific order. Sequences first need to be defined in
setup screen 3. Up to five (A - E) sequences can be pro-
grammed. See Define Shot Sequence, page 55.
After the first shot in a sequence completes, the next
shot can start. After all of the shots in a sequence have
completed, the sequence will start over at the first shot.
Manual Mode
Manual mode runs the pump when is pressed or
when the dispense valve is triggered. Use manual mode
to determine how much material is needed to fill a con-
tainer, prime the system, flush the system, or verify sys-
tem operation.
NOTE: All errors are ignored in this mode.
Park Mode
Park mode dispenses material until the pump reaches
the bottom of its stroke. Then the system will disable.