User's Manual

Set System Parameters
56 3A0294G
Set Password
NOTE: When the password is “00000,” the setup
screens can be accessed without entering a password.
1. Navigate to setup screen 4.
2. Press to access fields to make changes.
3. Press to navigate to the first password
field.
4. Press and to increment or decre-
ment to the desired digits of the password.
5. Press to enter the password.
6. Press to navigate to the next password field.
Follow steps 4-5 to enter and confirm the password.
7. Press to exit edit mode.
Disable Password
To disable the password, follow Set Password, page 56,
to change the password to “00000.”
Reset Password
If the password is forgotten, it can be reset without los-
ing the current settings or shot data.
1. Disconnect power to the user interface.
2. Reconnect power to the user interface.
3. When the power up screen appears, immediately
press and hold both the top soft key and the
for six seconds. The password automatically resets
to “00000.”
4. Follow the Set Password, page 56, instructions to
set the password if desired.