User's Manual

Installation

36 3A0294G

9. Secure cables to the air hose using zip ties. Tighten

all zip ties and then cut off the excess.

10. Bundle the cables and zip tie them close to the elec-

tronics subassembly bracket (1) so that they will fit

under the electronics subassembly cover (4).

11. Install the electronics subassembly cover; hand

tighten the screws to secure.

12. Install the power supply cord (14).

13. Open the air shutoff valves on the air control assem-

bly.

FIG. 64: Install Electronics Cover

r_262373_3A0294_41a

FIG. 65: Install Power Supply Cord

Install Power

Supply Cord

r_262373_3A0294_42a