User's Manual

Installation

30 3A0294G

Install Kit 262373

1. Close both shutoff valves on the air control panel.

2. Install the electronics subassembly (1) to the back

of the bracket on the ram post using four screws

(29) and washers (28).

3. Install display bracket subassembly (2) to the bot-

tom of the air motor using two screws (30) and two

washers (31).

4. Install the air valve subassembly (3).

a. Use two wrenches to remove the air hose,

elbow fitting, and pressure gauge from the air

controls.

b. Remove the air motor slider valve label.

FIG. 49: Close Shutoff Valves

FIG. 50: Install Electronics Assembly

Shutoff

Valve

Shutoff

Valve

r_262373_3A0294_28a

FIG. 51: Install Display Bracket

FIG. 52: Air Controls

r_262373_3A0294_29a

Air Hose

Label

Elbow

Fitting

Pressure

Gauge