User's Manual

Installation

3A0294G 23

10. Secure cables to the air hose using zip ties. Tighten

all zip ties and then cut off the excess.

11. Bundle the cables and zip tie them close to the elec-

tronics bracket (1) so that they will fit under the elec-

tronics subassembly cover (4).

12. Install the electronics subassembly cover. Install the

back cover first and hand tighten the screws to

secure. Then install the front cover; hand tighten the

screws to secure.

13. Install the power supply cord (14).

14. Open the air shutoff valves on the air control assem-

bly.

FIG. 30: Install Covers

r_262370_3A0294_23a

4 (Front)

4 (Back)

FIG. 31: Install Power Supply Cord

Install

Power

Supply

Cord

r_262370_3A0294_24a