User's Manual

Installation

3A0294G 19

c. Use a wrench to remove the air motor lift ring.

Then remove the lift ring adapter and both

o-rings. Discard the adapter and both o-rings.

d. Place the linear sensor magnet (13) on the

installation tool (27), and then insert the magnet

down into the top of the motor shaft.

e. Apply the supplied adhesive to the linear sensor

assembly (18) threads. Install the linear sensor;

torque to 30-36 ft-lbs (40.6-48.8 N•m). See F

IG.

21.

f. Place the new o-ring (20) on the lift ring adapter

(19), and apply the supplied adhesive to the

threads. See F

IG. 21.

g. Route the linear sensor cable through the lift

ring adapter. Install the lift ring adapter; torque

to 30-36 ft-lbs (40.6-48.8 N•m). See F

IG. 21.

h. Route the linear sensor cable through the hole

on the lift ring adapter.

i. Apply the supplied adhesive to the lift ring

threads. Install the lift ring; torque to 30-36 ft-lbs

(40.6-48.8 N•m). See F

IG. 21.

j. Remove the screw on the valve cover to remove

the cover. See F

IG. 22.

k. Install the reed switch sensor (22). Secure with

the 1 in. (25 mm) screw (24) and o-ring (23) pro-

vided. See F

IG. 22.

FIG. 20: Remove Lift Ring Adapter and O-rings

FIG. 21: Install Linear Sensor

r_262373_3A0294_before _linear

O-rings

Adapter

Lift Ring

r_262373_3A0294_after_linear

FIG. 22: Install Reed Switch Sensor

Screw

Cover

r_262370_3A0294_16a