User's Manual

Appendix D - Y-Adapter (124273) Connections
3A0294G 105
Appendix D - Y-Adapter (124273) Connections
The Y-adapter is used when two components are connected to the same connector on the breakout module. The
branch connectors, labeled 1 and 2, have identical pinouts and are combined in the trunk connector. The following
table provides descriptions and pins of all connectors used on the Y-adapter.
Branch Connector 1 - Black Pin Description Pin Number
M12 Connector, 5 pin, Female, A code Digital Input or Output 4
Used for Drum Low Input and Solenoid Air Output Not Used
2
Power
1
Ground
3
Shield Digital
5
Branch Connector 2 - Silver Pin Description Pin Number
M12 Connector, 5 pin, Female, A code Digital Input or Output 4
Used for Start / Stop Input and Solenoid Fluid
Output
Not Used
2
Power
1
Ground
3
Shield Digital
5
Trunk Connector - Silver Pin Description Pin Number
M12 Connector, 5 pin, Male, A code Digital Input or Output from Branch 1 4
Digital Input or Output from Branch 2
2
Power
1
Ground
3
Shield Digital
5