User's Manual

Component Identification

6 3A0261H

Component Identification

Control Boxes

Power input/fuse holder, 81/0365-3/11, can be set to either 115V or 230V. To determine what voltage it is currently

set to, look at the port and read what is showing through the cover window. To switch voltage, open the fuse holder

cover with a small screwdriver, pull the fuse holder out, flip the fuse holder 180°, push the fuse holder back in, and

snap the fuse holder cover back into place.

NOTE: Fuse part number: V-21610P

120 V power cord part number: 81/1051-1/11

240 V power cord part number: 121054

IG. 1: Motor Driven Control Box

CONTROL POWER

VERIFY INCOMING VOLTAGE

BEFORE CONNECTING POWER

WITH VOLTAGE SWITCH SETTING

VALVE I/O

MOTOR

AUDIO ALARM

START OPTIONS

Key:

A Emergency Stop

B Control Power Switch

C Touch Panel

D Alarm Speaker

E Power Input

F Start Options Connection

H A Tank Level Controls Connection

J B Tank Level Controls Connection

L Dispense Valve I/O Connection

U Motor Connection

BAC