User's Manual

Appendix A - User Interface Display

86 3A0260H

Maintenance Screen

Dispense Valve Control

When Automatic Dispense Valve Control is enabled, the

dispense valve will open and close as needed to dis-

pense material.

When Open the Dispense Valve is selected, the dis-

pense valve will open and remain open until Automatic

Dispense Valve Control is enabled.

Dispense Settings

Dispense Mode: Options include Bead and Shot.

• In Bead mode, dispensing begins when the initiate

shot button is pressed and dispensing ends when

the initiate shot button is released.

• In Shot mode, dispensing begins when the initiate

shot button is pressed and released. Dispensing

ends when the Dispense Duration (AC) elapses.

Dispense Duration: This is the amount of time the

machine will dispense at the given flow rate. This value

is only used in Shot Mode.

Flow Rate: This is the rate at which the machine will

dispense for the given dispense duration.

Manual Start Dispense

After adjusting the settings, the user can press the Man-

ual Start Dispense button (AE) to dispense material

using the current settings.

NOTE: This button performs the same function as the

manual purge button located on the control panel.

Key:

Z Enable Automatic Dispense Valve

Control

AA Open the Dispense Valve, Disable

Automatic Dispense Valve Control

AB Dispense Mode Selection

drop-down menu

AC Dispense Duration Input Box

AD Flow Rate Input Box

AE Manual Start Dispense