User's Manual

Maintenance
36 3A0260H
Maintenance
Prior to performing any maintenance procedures, follow
the Pressure Relief Procedure on page 28.
Maintenance Schedule
The following tables list the recommended maintenance procedures and frequencies to operate the equipment safely.
The maintenance is divided between mechanical and electrical tasks. Maintenance must be performed by trained
personnel per this schedule to assure safety and reliability of the equipment.
Mechanical
Electrical
* Check Component Manual for more detailed maintenance information.
Operator Maintenance Person
Task Daily Weekly Monthly
3-6
months
or
125,000
cycles
18-24
months
or
500,000
cycles
36-48
months
or
1,000,000
cycles
As
Required
Inspect system for leaks

Depressurize fluid, after opera-
tion

Remove heat from system,
after operation

Inspect filter (234967) bowls
and drain

Check hoses for wear

Check/tighten fluid connections 
Check/tighten air connections 
Lubricate dispense valves*

Replace gear meter seals

Rebuild dispense valve*

Replace air filter

Replace Solenoid

Replace gear meter drive shaft

Replace gear head

* Check component manual for more detailed maintenance information.
Task Weekly
Check cables for wear

Verify cable connections

Verify operation of “System Stop” button
