User's Manual

Repair
32 3A0238P
Remove Hydraulic Gear Pump
1. Shutdown the system. See Shutdown on page 21.
2. Remove Hydraulic Power Pack. See page 27.
3. Disconnect the tube assembly (247) from the accu-
mulator (242).
4. Remove two hex head cap screws (258) connecting
the support bracket (257) to the hydraulic housing
(206).
5. Carefully remove motor assembly from tank (237).
6. Disconnect the tube assembly (217) from the gear
pump (211) and hydraulic housing (206).
7. Remove the two hex head cap screws (214) and
carefully remove the gear pump (211) from the
hydraulic housing (206).
NOTE: Do not lose the pump coupler (212).
8. Remove the inlet fitting (219) and outlet fitting (215).
9. Loosen set screw and remove pump coupler (202).
FIG.29
242
238, 239
201
264
240
247
258
257
206
237
FIG.30
217
211
214
219
215
212