User's Manual

Setup

3A0238P 17

S-Head and GX-16

See FIG. 9 and FIG. 10.

1. Connect the B2 hose, with green/white markings, to

the hydraulic open (HO) port fitting.

2. Connect the A2 hose, with green markings, to the

hydraulic close (HC) port fitting.

3. Hand tighten each fitting.

4. Bleed air from the hydraulic fluid lines. See the

applicator manual for instructions.

5. Tighten each fitting 1-1/2 flats past hand tight.

FIG. 9: Hydraulic connections on S-Head

FIG. 10: Hydraulic connections on GX-16

TOP

RIGHT

ti17747a