User's Manual

Cutter Stacking Recommendations

3A0102C 29

Diamond Blades

Groove

Width

Number

of Blades

Number of

Steel 1/8 in.

Spacers

Number of

Aluminum 1/4

in. Spacers

1 in. (2.5 cm) 4 5 36

2 in. (5 cm) 8 9 32

3 in. (7.5 cm) 12 13 28

4 in. (10 cm) 16 17 23

5 in. (12.5 cm) 19 21 21

6 in. (15 cm) 23 24 15

7 in. (17.5 cm) 27 28 11

8 in. (20 cm) 31 32 7

9 in. (23 cm) 35 36 3

10 in. (25 cm) 38 39 2

For best performance, use 1/4 in. spacers on each end of

shaft to center diamond blades on drum.

1/4 in. Spacers

1/8 in. Spacers

ti15135a

1/4 in. Spacers

(SE) Spacer-1/8 in.

(D) Diamond Blade

1 (D)

ti15055a

ti15054a

1 (SE)

1 (D)

1 (SE)

(SQ) Spacer-1/4 in.

NOTE: Be sure to rotate the blade 180 degrees

every time an additional blade is added to a stack.