User's Manual

Installation
6 3A0006D
Installation
F IG . 3 shows the ACS panel. See F IG . 4, and F IG . 5 for
schematic diagrams showing wiring connection points of
all required and optional system components.
See F
IG . 6 for a detailed schematic of VFD, Barrier, and
Start/Stop connections.
Inputs and Outputs
F IG . 3 shows the ACS Module input and output terminal
block. See also F
IG . 4, F IG . 5, and System Diagnostic
Indicators, page 30.
Indicators and Pushbutton
F IG . 3 shows the ACS Module indicators and POWER
INTERRUPT pushbutton. See also F
IG . 4 and F IG . 5.
All electrical wiring must be completed by a qualified
electrician and comply with all local codes and
regulations.
Table 1: ACS Module Indicators and Pushbutton
Indicator or
Button Color Condition
POWER ON
indicator
Solid
Green
The ACS is powered and
the pump is running.
DRIVE
ENABLED
indicator
Solid
Red
Turns on if the ACS is
sending an analog drive
command and the drive
enabled relay is closed.
POWER
INTERRUPT
pushbutton
n/a Press momentarily to
interrupt power, for sys-
tem reboot.
Power is restored when
released.
F IG . 3. ACS Module Indicators and Input/Output Terminals
Indicators;
see Table
Power
Interrupt
Pushbutton;
see Table 1