User's Manual

ACS Software Update

38 3A0006D

9. Click OK when the download is complete. The

popup window will clear automatically. See F

. 37.

NOTE: A new feature allows for setting of the default IP

Address of “192.168.1.5” if you cannot remember the

previous configured IP. To reset to the default IP

Address:

• Power OFF the ACS Module.

• Activate the RESET INPUT (or short to

ground/common) and HOLD.

• Power ON the ACS Module.

• Hold the RESET INPUT (pins 7-8 of input con-

nector on ACS module) for 5 to 10 seconds,

then remove the RESET INPUT (with power still

applied).

• The IP Address has now been changed to

192.168.1.5, but the change will not take affect

until power is cycled again.

• Cycle power to the ACS Module OFF then ON,

to apply the change.

NOTE: The white power button on the ACS Module can

be used to cycle power during this process. It is not nec-

essary to unplug the 24 Vdc supply.

. 38. Click OK When Download is Complete

Click OK when download

is complete.

Window will clear automatically.