User's Manual

Warnings
3A0006D 3
Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-
tion point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When
these symbols appear in the body of this manual, refer back to these Warnings. Product-specific hazard symbols and
warnings not covered in this section may appear throughout the body of this manual where applicable.
Glossary of Terms
WARNING
ELECTRIC SHOCK HAZARD
This equipment must be grounded. Improper grounding, setup, or usage of the system can cause
electric shock.
• Turn off and disconnect power at main switch before disconnecting any cables and before servicing
equipment.
• Connect only to grounded power source.
• All electrical wiring must be done by a qualified electrician and comply with all local codes and
regulations.
Term Description
ACS Advanced Control System
VFD Variable Frequency Drive
TDC Top Dead Center; measures position of pump drive
I/O Input/output
PCB Printed Circuit Board
Run Set of commands enabling motor to run in designated direction
Stop Set of commands authorizing motor to stop running