User's Manual

Operation

3A0006D 21

ACS System Status Screen

See F

. 13. The System Status screen appears when

the ACS Module is powered up. The screen displays the

current conditions and status of up to 50 pumps (num-

bered 0-49) in the system.

Click on a Pump Name key to open the Run screen for

that pump. F

. 14 shows the Run screen.

If communication is interrupted due to a loose cable or

broken wire, first correct the problem, then click on

to re-establish communication.

NOTE: The Visual Basic software program for the ACS

Module is available as a free download from

www.graco.com/Finishing. Navigate to the E-Flo Pump

product page for the download link.

NOTE: Open the program (Start>All Programs>Gra-

coACS>GracoACS). The program will search for all

pumps in the ACS system and populate the ACS Sys-

tem Status Screen. See F

. 13.

NOTE: This program does not require the PC be config-

ured with Static IP Address.

. 13. ACS System Status Screen

Click on a Pump Name

key to open the Run

screen for that pump

(see page 23).

Configured through web browser, see

page 20.