User's Manual

Operation

20 3A0006D

NOTE: Verify that the wireless connection is turned off

(disabled) before performing step 4.

4. In a web browser, enter: http://192.168.1.5:9080

5. Press Enter. The ACS Module Setup Screen

appears. See F

. 12.

6. Each ACS module is provided with a default IP

address (192.168.1.5). The assigned ACS IP

address must be different from any other IP

address in the network. Only the last digit of the

address is editable. Type a new number in the edit-

able field, then click to

enter.

7. Set the Node ID number only if the ACS is con-

nected to a Graco Gateway. The ID number must

be unused by other ACS modules. Click on

to access the default

Node ID number, which will then appear following

Device ID:. Type a new number in the Enter New

ID field, then click to enter.

. 12: ACS Module Setup Screen