User's Manual

Operation
3A0006D 19
c. In the Local Area Connection Properties win-
dow (F
IG . 10), scroll to Internet Protocol
(TCP/IP) and double click, to open the Internet
Protocol (TCP/IP) Properties window (F
IG . 11).
d. See F
IG . 11. Set to “Use the following IP
address:”
NOTE: The IP address being created in step e
must be different from any other IP address
used in the network.
e. Type in the following 10 characters (including
the dots):
192.168.1.
then type additional numbers (for example, 201)
to create a unique IP address for the computer.
f. Type in the following Subnet mask:
255.255.255.0
NOTE: To reconnect to the user network, change the
setting back to “Obtain an IP Address Automatically.”
g. Click on OK to accept the changes and close
the Internet Protocol (TCP/IP) Properties win-
dow.
h. Click on OK to close the Local Area Connection
Properties window.
i. Close the Local Area Connection Status win-
dow and Network Connections window.
F
IG . 10: Local Area Connection Properties Window
F IG . 11: Internet Protocol (TCP/IP) Window
192 . 168 . 1 . 201