User's Manual

Installation
8 333391B
1. Use a flat blade screwdriver to remove fuse box (f)
located under switch as shown in F
IG. 8.
2. Install 2 fuses (17 or 18) of the same amperage in
the fuse box.
a. Insert the silver-capped end of fuse (17 or 18)
into bottom of fuse box (g) as shown in F
IG. 10.
b. With the silver cap above the top of the fuse
box, gently push the glass tube into fuse seat as
shown in F
IG. 10.
c. Gently push down on the top silver fuse cap to
securely hold the fuse in the seat as shown in
F
IG. 11.
3. Reinstall fuse box under switch (3).
FIG. 8
NOTICE
To prevent breaking fuses during installation, do
not force the silver capped end of the fuse through
the fuse seat opening.
FIG. 9
f
17 or 18
FIG. 10
FIG. 11
g