User's Manual

Smart Control Operation
34 333388B Operation
Marker Layout Mode
The Measure Mode feature sprays a dot or a series of
dots to mark an area.
1. Use to select Setup/Information. Press
to open Marker Layout Mode.
2. Use arrow keys to set up a marker pattern.
3. Marker layout example shows a typical lane layout
for reflective markers. Set space sizes up to eight
consecutive measurements. By leaving zeros in any
space, Marker Layout Mode will skip to the next mea-
surement in a continuous loop.
Some other uses of Marker Layout Mode are:
• Multiple spaced handicap stall layout
• Double line stalls
4. Set gun switch to skip line.
5. Press gun trigger control to start marking dots. Press
gun trigger control again to stop.
NOTE: An indicator before and after Marker Mode on
the screen alternately flash when gun trigger control is
pressed to signal mode is active.
Ref. Description
1 Exits and returns to Information Menu.
2 Select value to change.
3 Adjust spacing value.
1
2
3
ti23823a
ti18564b
8.00 ft. 8.00 ft.
4.00 ft.
4.00 ft.
16.00 ft.
48.00 ft.
4.00 ft.4.00 ft.
ti23812a