User's Manual

Driving Instructions
18 333388B Operation
Driving Instructions
Perform startup see, Setup/Startup, page 9.
Use the handle bars of the LineStriper to control all
motion during operation. In addition to steering the
LineStriper, the handle bars also control forward and
reverse movement by pulling the forward/reverse
control lever.
NOTE: Make sure wheel motor bypass valve is
engaged (see page 19).
To move forward: Disengage brake and slowly pull
control lever on right side of handlebar.
To move in reverse: Slowly pull control lever on left
side of handlebar.
To stop: Release control lever and allow it to return to
center.
To turn right and left: Turn the handle bar right or left
to steer the LineStriper.
ti23155a
ti23156a
ti23157a
ti23158a
ti23159a