User's Manual

Setup Mode Scree

Maintenance S

creen 4

Maintenance screen 4 displays cycle counts for a

selected color, catalyst, or solvent valve.

Press and hold the Reset button

for 1-2

seconds to reset the counter.

If the syste

m is in Standby, valves can be opened

or closed by

selecting or deselecting the box for the

correspond

ing valve.

NOTE: Gun valves are available only if Mix at Wall is

enabled on System Screen 3, page 42.

Figure 59 Maintenance Screen 4, Color Valve Resets

Figure 60 Maintenance Screen 4, Solvent Valve

Resets

NOTE: When Solvent is selected in the Material

ﬁeld, the number to the right of “Solvent” is the pump

number, not the material number.

54 332562B