User's Manual

Setup Mode Scree
ns
Pump Screen 1
NOTE: Your system may include 2, 3, or 4 pumps.
Information for each pump is accessible under a
separate tab in the menu bar at the top of the screen.
Select the tab for the desired pump. Each pump has
three screens. Only the screens for Pump 1 are
shown here, but the same fields appear on all.
Pump screen
1 includes the following fields which
define the pu
mp.
Figure 43 Pump Screen 1 — Resin Pump
Figure 44 Pump Screen 1 — Catalyst Pump
Pump Size
Select 35cc or 70cc, as appropriate.
Inlet Pressure
Select one of the following:
• Disabled
• Monitor, to track inlet pressure
Select Color Change
Select this box if your system uses color change.
Materials
Enter the number of materials used in your system.
Each color change module controls 8 colors.
Total Hose Length
Compute the length of the hoses from the supply
stack to the pump and from the pump to the outlet
stack. Enter the total length.
Pump Hose Diameter
Enter the diameter of the supply and output hoses.
Valve Mapping
Remote Valve Map
NOTE: Th
is valve mapping dropdown menu displays
if the pu
mp is a resin pump with Color Change
selecte
d on this screen and Mix at Wall enabled on
System
Screen 3, page 42.
Select whether to use the standard color change
valve mapping or one of two alternate color change
valve mappings for the remote valve stack. See the
Color Change and Remote Mix Manifold manual
333282 for more information.
Valve Map
NOTE:
This valve mapping dropdown menu displays
if th
e pump is a catalyst pump with Color Change
sele
cted on this screen.
Select whether to use the standard color change
valve mapping or the alternate color change valve
mapping for the catalyst pump(s). See the Color
Change and Remote Mix Manifold manual 333282
for more information.
Available Colors
The module displays the number of colors available
in your system. This field is not editable.
48 332562B