User's Manual

Operation
Valve Setting
s
Dose valves and purge valves are factory set with the
hex nut (E) 1-1/4 turns out from fully closed.
Figure 14 Valve Adjustment
Shutdown
1. Flush out the mixed material to avoid potlife errors
and fluid setup in the lines. See Purging, page 27.
2. Follow the Pressure Relief Procedure, page 29.
3. Close the main air shutoff valve on the air supply
line and on the control box.
4. Press
on the Display Module to turn off
power to the pumps.
5. Shut off system power (0 position).
30 332562B