User's Manual

Overview
Overview
Usage
This electronic two-component paint proportioner
can blend most two-component paints, including
quick-setting paints (those with a pot life of 5 minutes
and greater).
• The system d
ispenses Material A, monitors fluid
flow, and con
tinually dispenses Material B at ratio.
• Can proportion at ratios from 0.1:1 to 50.0:1
(depending on material, flow rate, pump size
selection, and mix point).
• Will display the last 200 jobs, 200 errors, and 200
events with date, time, and description.
Component Identification and Definition
Component
Descripti
on
Electric
al Control Box
• Enhanced
Fluid Control Module (EFCM)
•24VPower
Supply for the barrier board and the EFCM
•48VPowe
r Supply for pump motors
• Solenoi
d Valves for solvent valve and gun flush box (if present)
•AirFlow
Switch
•Relay
•Option
al Pressure Switch for gun flush box (if present)
•PumpCo
ntrol Modules (2), one for each pump
•CANIso
lation Board
•Intri
nsically Safe Power Barrier Board
Fluid Components • Mix manifold (accessory), which can be attached to the operator’s belt.
• Color/catalyst valve stacks, including pneumatically operated valves for
Material A and B, as well as solvent valves.
• Solvent Flow Switch
• Pumps
• Pressure transducers
Adv
anced Display Module
Use to set up, display, operate, and monitor the system. Use for daily
painting functions including choosing recipes, reading/clearing errors,
and placing the system in Spray, Standby, or Purge mode. Locate in the
non-hazardous area.
Bo
oth Control
Us
e for daily painting functions including choosing recipes,
re
ading/clearing errors, and placing the system in Spray, Standby, or
P
urge mode. Locate in the hazardous area.
332562B 13