User's Manual

All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
For patent information, see www.graco.com/patents.
Original instructions. This manual contains English. MM 332517
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA
Copyright 2013, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.
www.graco.com
August 2013
4. Remove cover and pump assembly from top of
empty bucket (a).
5. Remove follower plate (if used) from inside bucket.
6. Remove empty bucket from base (2). Discard
bucket according to all applicable safety standards.
7. Complete installation of new bucket following Steps
3 - 9, pages 3 - 4.
8. Complete pump installation. See Dyna-Star HP or
HF Pump instruction manual for complete installa-
tion instructions.
Parts: 77X513
Accessories
35# Follower Plate: 77X510
Graco Information
For the latest information about Graco products, visit www.graco.com.
TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor.
Phone: [phone] or Toll Free: 1-800-533-9655, Fax: [phone]
HEAVY EQUIPMENT HAZARD
Lifting or moving heavy equipment incorrectly can
cause serious injury. To avoid serious injuries, such as
muscle strain or back injuries, when moving pump
always use a lifting aid secured to the pump lift ring .
See Technical Data, included in the pump instruction
manual for pump weight information.
Ref. Description Qty
1 COVER 1
2 BASE 1
3 GASKET, pump 1
4 SCREW, cap, sch 4
5 WASHER, lock spring 4
6 WASHER, M-12 4
8NUT, hex 2
9 NUT, wing, M12 2
4
5
3
9
1
8
6
2
6