User's Manual

Installation

332517B 5

14. Reinstall cover (c) using bolts (b). Use a wrench to

tighten bolts securely.

15. Complete pump installation. See Dyna-Star HP or

HF Pump instruction manual for complete installa-

tion instructions.

Pressure Relief

Follow the Pressure Relief Procedure whenever

you see this symbol.

To relieve pressure in the system, use two wrenches

working in opposite directions on pump outlet fitting to

slowly loosen fitting only until fitting is loose; no more

lubricant or air is leaking from fitting as shown in F

IG. 9.

Changing Grease Bucket

NOTE: The pump does not have to be removed from the

cover to change the empty grease bucket.

When grease bucket is empty:

1. Disconnect Dyna-Star pump from main power

source.

2. Relieve pressure (see Pressure Relief procedure

provided or in your pump manual).

3. Unscrews wing nuts (9) and remove wing nuts and

washers (8) from base rod (2a).

FIG. 8

This equipment stays pressurized until pressure is

manually relieved. To help prevent serious injury from

pressurized fluid, such as skin injection, splashing

fluid and moving parts, follow the Pressure Relief

Procedure when you stop dispensing and before

cleaning, checking, or servicing the equipment.

FIG. 9

FIG. 10

8,9