User's Manual

All written and visual data contained in this document reflects the latest product information available at the time of publication.

Graco reserves the right to make changes at any time without notice.

For patent information, see www.graco.com/patents.

Original instructions. This manual contains English. MM 332515

Graco Headquarters: Minneapolis

International Offices: Belgium, China, Japan, Korea

GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA

www.graco.com

Revised February 2014

Dip Stick Installation

1. Remove plug (a) from cover (b). Discard plug, you will not reuse it (FIG. 18).

2. Slide dipstick through hole (aa) in cover (b) and into reservoir (F

IG. 18 and FIG. 19). Wrench tighten it in place.

3. To determine the level of the fluid remaining in the reservoir, loosen and remove dip stick (c) from reservoir cover

(b).

FIG. 18

FIG. 19