User's Manual

Installation
332515E 5
16. Slide pump down-tube through hole in the center of
the reservoir cover (b) and hole in the center of the
follower plate (m) as shown in F
IG. 10.
NOTE: When pump is correctly installed, the breather (t)
will be below the control box (s) as shown in F
IG. 11.
17. Replace screws (e) and washers (f) and wrench
tighten securely (F
IG. 12).
18. Reinstall cover (d) using bolts (c) (F
IG. 13). Use a
wrench to tighten bolts securely.
FIG. 10
FIG. 11
b
m
t
s
FIG. 12
FIG. 13
e
f
d
c