User's Manual

Fluid Supply
Single Color Connections
NOTE: Check valves (J, L) are provided on the inlet
and outlet manifolds of each pump.
1. Connect the color supply line to the pump fluid
inlet fitting (S).
2. Connect the color outlet line to the pump fluid
outlet fitting (R).
3. Make the same connections on the catalyst side.
NOTE: For isocyanate catalyst materials, moisture
resistant hose is required to supply fluid to the system
and also as a fluid line between the pump and the
mix manifold.
Figure 16 Pump Inlet and Outlet Connections
Color Change Connections
If you are installing the color change accessory kit,
make the fluid connections as described in manual
332455.
332457C 23