User's Manual

Configuring Your System
1/4 in. (6 mm) ID Hose Bundles
Select a hose bundle from the following table. Always use Graco hoses.
Application Hose Bundle
Part No.
Length Material Maximum
Fluid Working
Pressure
24T140
25 ft (7.6 m)
Low Pressure
Conventional Air
Spray
24T141
50 ft (15.2 m)
Nylon (A side and Solvent),
Moisture Guard (B side), Air Hose
225 psi (1.6
MPa, 16 bar)
24T138
25 ft (7.6 m)
Low Pressur
e
Electrosta
tic Air
Spray*
24T139
50 ft (15.2 m)
Nylon (A side and Solvent),
Moisture Guard (B side),
Grounded Air Hose with left-hand
thread
225 psi (1.6
MPa, 16 bar)
24T247
25 ft (7.6 m)
High Pressure
Conventional
Air-Assisted Spray
24T248
50 ft (15.2 m)
Nylon (A side and Solvent),
Moisture Guard (B side), Air Hose
2000 psi (13.8
MPa, 138 bar)
24T245 25 ft (7.6 m)
High Pressure
Electrostatic
Air-Assisted Spray*
24T246
50 ft (15.2 m)
Nylon (A side and Solvent),
Moisture Guard (B side),
Grounded Air Hose with left-hand
thread
2000 psi (13.8
MPa, 138 bar)
* To use a quick disconnect on an existing electrostatic air hose, see
Electrostatic Air Hose Quick Disconnect Kit 24S004, page 25.
3/8 in. (10 mm) ID Fluid Hoses
If 3/8 in. (10 mm) fluid hose is required for your application, order one of the following to replace the 1/4 in.
hose in your hose bundle. Always use Graco hoses.
Application Hose Part No. Length Material Maximum Fluid Working Pressure
24T763
25 ft (7.6 m)
Low Pressure Air
Spray
24T764
50 ft (15.2 m)
Nylon
200 psi (1.4 MPa, 13.8 bar)
Fluid Whip Hoses
Select a fluid whip hose from the following table. Always use Graco hoses.
Application Hose Part No. Hose I.D. Length Material Maximum Fluid
Working Pressure
24N641
0.125 in. (3 mm) 6 ft (1.8 m)
Nylon
3200 psi (22 MPa,
220 bar)
Low Pressure
24N305 0.25 in. (6 mm) 6 ft (1.8 m) Nylon 225 psi (1.6 MPa,
16 bar)
24N641
0.125 in. (3 mm) 6 ft (1.8 m)
Nylon
3200 psi (22 MPa,
220 bar)
High Pressure
24N348
0.25 in. (6 mm) 6 ft (1.8 m)
PTFE
3000 psi (20.7 MPa,
207 bar)
332457C 15