User's Manual

Appendix C - ADM Run Screens Overview
86 313997W
Status Screen, Conditioning Control
This screen allows users to turn on and off heat zones
individually or all at once. When a zone is on it is actively
controlling temperature. Refer to the table below for
color code definitions.
To turn a single zone on/off:
1. Press to enter the Conditioning Control screen.
2. Use the arrows keys to navigate to the desired zone.
3. Press to turn the selected zone on. When a
zone is on, the button will be selected. Press the
button again to turn the zone off.
To turn all zones on/off:
1. Press to enter the Conditioning Control screen.
2. Press the to turn on all zones. When one or
more zones are on, the button will be selected.
Press the button again to turn all zones off.
◆ No setpoint box will be displayed if selected as moni-
tor zone.
Errors Screens
This screen shows users a list of errors that have
occurred in the system. Each error entry includes a
description and error code along with a date and time
stamp. There are 5 pages, each holding 10 errors. The
50 most recent errors are shown.
Refer to the Troubleshooting section on page 58 for a
detailed description of all of the system errors.
Events Screens
This screen shows users a list of events that have
occurred in the system. Each event includes a descrip-
tion and event code along with a date and time stamp.
There are 20 pages, each holding 10 events. The 200
most recent events are shown.
Refer to the Troubleshooting section on page 58 for a
detailed description of all of the system events.
Zone
Setting Color Definition
OFF
Black Dispense Disabled
Grey Dispense Allowed
ON
Yellow Dispense Disabled
Green Dispense Allowed
All zones shown for reference. Only four zones may
be active at one time.