User's Manual

Appendix B - ADM Setup Screens Overview

78 313997W

Conditioning Screen 2

This screen shows the fluid path for the temperature

conditioning components and temperature setpoints for

each component.

NOTE: If tank blanket heaters or inline heaters are

installed along with hose heat, the hose heat setting will

be limited to at or below the inline or tank heat setting.

To edit the temperature setpoint and alarms for a partic-

ular component:

1. Press then use the arrow keys to navigate to

the component you wish to edit.

2. Press to display the setpoint and alarm values

associated with that component.

3. Edit the setpoint and alarm values and then press

to return to Conditioning Screen 2.

NOTE: The high alarm and low alarm values must be at

least +/-9°F (5°C) than the material temperature value.

OTE: All components are shown installed for refer-

nce only. Only 4 components can be installed at one

ime.