User's Manual

Shutdown

50 313997W

Shutdown

1. Park pumps.

a. From the Home screen, press and select

Standby mode.

b. Press . Material will dispense for non cir-

culation systems. Pump will park automatically.

Once pump is parked, pump will stop moving.

If a dispense gun with a trigger is installed,

pulling the trigger will begin a park operation.

Material will dispense for non circulation sys-

tems.

c. For models with an EP, Fusion, or P2 gun

only, turn diversion valves to tank then press

Park . Pressure must be below 400 psi

(2.8 MPa, 28 bar).

2. Press the enable/disable key on the ADM to

disable the ADM.

3. Turn main power switch (MP) to OFF position.

4. Close A (Red) and B (Blue) fluid supply valves (FV).

5. Perform Pressure Relief Procedure on page 51.

6. Shut down feed pumps as required. See feed pump

manual.

ti9883a1