User's Manual

Technical Data
26 313903C
Technical Data
*User Supplied Component: Graco recommends
• Waldom-Molex Housing #22-01-3067 (or alternate part: AMP Housing #770602-6)
• Waldom-Molex Pins #08-50-01114 (or alternate part: AMP PINS #770666-1
† Do not mount in direct sunlight. Prolonged exposure will damage LCD.
Input Power Requirements 115VAC - 100 ma; 230VAC - 50 ma
24 - 30VDC - 200 ma
Fuses: FU-1 and FU-2 Use Medium Lag Fuses Only. Do
NOT use Fast Acting Fuses.
1/4 in. x 1 in.: 0.5 AMP, 250VAC
5 mm x 20 mm: 0.5 AMP, 250VAC (buss# GMA-500 or
equivalent)
Proximity Switch Pulse Inputs 24VDC - 12 ma each
Tach Sensor Pulse Input 24VDC - 12 ma
Zone Bypass and Alarm Inputs 24VDC - 12 ma each
Relay Outputs Contact Ratings
Rated Load 0.5Amp at 125VAC
1Amp at 30VDC
Maximum Carry Current 2Amp
Maximum Operating Voltage 250VAC
220VDC
Maximum Switching Capacity 62.5 VA, 60W
Minimum Permissible Load
10
µA 10mVDC
Relay Coil Current Consumption 70ma @ 115VAC
40ma @ 230VAC
150ma @ 24VDC
Communications Port Connector* TTL Outputs (non-fused) 24VDC max 100ma max.
Maximum Pulse Rate 300 per minute @ 50% duty
Maximum Cycle Time 10.9 minutes
Ambient Temperature Range† - 4°F to +158°F (- 20°C to +70°C)
Net Weight
Model: 562870 8.4 lbs (3.8 kg)
Model: 562871 18.3 lbs (8.3 kg)