User's Manual

Setup Mode

32 313882C

Option Screens

NOTE: See FIG. 21 on page 28 for a map of the Option

Screens. Detailed screen descriptions follow.

NOTE: Each screen displays the current screen number

and the total number of screens in the group.

Option Screen 1

Flush Volume Check

This field only appears if Solvent Monitor is set to

“Meter” in Configure Screen 5, page 31.

If set to “On”, Minimum Flush Volume will appear in Rec-

ipe Setup Screen 2, page 39.

Flush and Fill Input

If set to “Global”, Color/Catalyst Purge and Color/Cata-

lyst Fill are added to Advanced Setup Screen 1, page

35. Advanced Setup Screen 2, 3, and 5 are added.

See pages 35-37.

If set to “Recipe”, Color/Catalyst Purge and Color/Cata-

lyst Fill are added to Recipe Setup Screen 2, page 39.

Recipe Setup Screen 3, 4, and 7 are added. See

pages 40-41.

K-Factor Input

If set to “Global,” Advanced Setup Screen 4, page 36 is

added.

If set to “Recipe,” Recipe Setup Screen 5, page 41, is

added.

Minimum Material Fill Volume

Enter 0-9999 cc.

Stage Fill Volume

This field refers to the amount of material that is

required to fill the mixed material line from the A/B fluid

panel to the C fluid panel, before adding component C.

This value must be the same as the selected dose size.

Default is 50 cc.

Verification Screen

Verification

This screen appears if Flush and Fill Input or K-Factor

Input are changed from “Recipe” to “Global” in Option

Screen 1.

IG. 28. Option Screen 1

FIG. 29. Verification Screen