User's Manual

Setup

313877E 11

Motor Driven PD44 Only

1. Connect Dispense Valve I/O, Start Options, and

Motor logic cables. If level controls are installed,

connect Level Controls logic cables.

2. Adjust customer supplied air pressure regulator to

80 psi (0.6 MPa, 6 bar).

3. Perform Setup procedure for dispense valve and

feed system components. See Related Manuals on

page 3.

NOTICE

Feed system and main logic control system must

use separate air supplies.

VERIFY INCOMING VOLTAGE

BEFORE CONNECTING POWER

WITH VOLTAGE SWITCH SETTING

VALVE I/O

MOTOR

AUDIO ALARM

START OPTIONS