User's Manual

Operation
44 313875J
Dispense in Operator Mode
Operator Mode begins dispensing when is pressed
and stops when it is pressed again.
NOTE: If a footswitch is used, press and hold to dis-
pense. Release to stop dispensing.
1. Navigate to the Home screen.
2. Press repeatedly to select Operator Mode
then press to accept.
3. Check the dispense settings shown at the bottom of
the screen.
4. If desired, change the dispense settings.
a. Press to enter editing mode.
b. Use the left and right arrow keys to select the
item to change.
c. Use the numeric keypad to type the new value.
d. Press to accept the new value.
e. Press to exit editing mode.
5. Press to begin dispensing.
6. Press to stop dispensing.
7. Check the ADM for errors and pop-up notifications
that could indicate a faulty dispense. Press to
acknowledge any displayed errors.