User's Manual

Models
4 313874E
Models
* Full load amps with all devices operating at maximum capabilities. Fuse requirements at various flow rates and
mix chamber sizes may be less.
** Values are dependent on installed pump size. Values shown are for largest available pump size.
◆ Flow rate is independent of frequency 50/60 Hz.
‡ If a motor control module is replaced, see Adjust Motor Control Module Selector Switch on page 16 to set the
machine to the proper maximum fluid working pressure.
System approved
Full Load
Peak Amps
Per Phase*
Voltage
(phase)
System
Watts†
Max Flow
Rate◆**
lb/min (kg/min)
Approximate
Output per
Cycle (A+B)**
gal. (liter)
Hydraulic
Pressure
Ratio**
Maximum Fluid
Working Pressure ‡
psi (MPa, bar)
24F872 60 A 230 (3)
24,000 66 (30) 1.0 (3.8) 1.63 2000 (14, 138)
24F391
55 A 400 (3)
24F873
✔
55 A 400 (3)