User's Manual

Run Mode

313855H 29

Run Mode

When you first turn the Lubrication Controller power on,

the identification screen shown in F

IG. 53 displays.

A Display Contrast Adjustment: UP and DOWN

Arrows can be used to adjust the display contrast.

B Backlight Brightness Adjustment: LEFT and

RIGHT Arrows can be used to adjust the backlight

brightness.

NOTE: Contrast and Brightness adjustments can be

made on any Run Screen at any time.

C Software (Part Number): 15Y354

D (Software) Version: 1.01.XX

Screen Identification

The following screen is only shown as an example of the

information that is displayed on a Run screen. A com-

plete description of the icons and symbols shown in F

IG.

54 is provided on page 3.

A Operating Mode Identification - Sets up Pump On/

Pump Off, page 22.

B Time Counter - Actual elapsed time counts down while

the pump runs - set up in Pump On Setup, page 18.

C Progression Bar - Real-time, visual representation of the

elapsed time the pump has been on. Runs in conjunction

with B.

D Total Pump On Time - Shows the total amount of time

the pump is on. Setup on the Pump On setup screen,

page 18.

FIG. 53

FIG. 54