User's Manual

Setup

313855H 27

Quick Cycle Screen Setup

The Quick Cycle screen setup is used to setup a Trou-

bleshooting profile.

1. Use the Arrow keys to move the cursor over the

CYCLES field.

2. Press ENTER.

3. Use the UP/DOWN arrows to move up and down

through the numbers 0-9 until the first number you

want in the CYCLES field is displayed.

4. Use the RIGHT arrow to move the cursor to the next

field. Repeat step 3.

NOTE: The maximum number of Cycles you can setup

in this field is 99.

5. Use the Arrow keys to move the cursor over the

TIME ON field.

6. Press ENTER.

NOTE: Time On and Time Off in QUICK CYCLE mode

only, are displayed in Seconds.

7. Use the UP/DOWN arrows to move up and down

through the numbers 0-9 until the first number you

want to use in the TIME ON field is displayed in the

field.

8. Use the RIGHT arrow to move the cursor to the next

field. Repeat step 7.

9. Press ENTER.

10. Use the Arrow keys to move the cursor over the

TIME ON field.

11. Press ENTER.

12. Repeat steps 7 - 9 for the TIME OFF field.

13. Use the Arrow keys to move the cursor over the

pull-down menu.

14. Select ON.

15. The Quick Cycle begins.

NOTE:

• The maximum Time Off and Time On is 99 seconds.

• When complete, the system returns to the Run

Mode. It does not come back to the Quick Cycle

Setup Screen.

LOW LEVEL FILTERING Setup

1. Use the UP/DOWN Arrow keys to move the cursor

over LL FILTERING.

2. Press ENTER to display the LL FILTERING setup

screen.

IG. 50

FIG. 51