User's Manual

Maintenance
313787C 21
Fat Track
™
Front Swivel Wheel
System
ANNUALLY: Tighten nut (86a) on screw under dust cap
(92) until spring washer bottoms out. Then back off the
nut 1/2 to 3/4 turns.
ANNUALLY: Tighten nut (82) on screw (90) until it
begins to compress spring washer (83). Then tighten an
additional 1/4 turn.
MONTHLY: Grease the wheel bearing.
PERIODICALLY: Check caster locking pin (86t) for
wear. If pin is worn out, there will be play in the caster
wheel. Reverse or replace the pin as needed.
PERIODICALLY: Check caster wheel alignment as nec-
essary.
FatTrack
™
Front Swivel Tire Alignment
Align front wheel as follows:
1. Loosen cap screw (86h).
2. Rotate front wheel fork left or right, as necessary, to
straighten alignment.
3. Tighten cap screw (86h). Push striper and let striper
roll with hands off of striper.
NOTE: If striper rolls right or left, then repeat steps 1
and 3 until striper rolls straight.
86h
ti14527a