User's Manual

Parts
56 313540G
▲ Replacement Danger and Warning labels, tags, and
cards are available at no cost.
† Model 256887 only.
✿ Available with fluid hose kit 257791.
✖ Available with pin and bearing kit 257794.
★ Not shown.
118 247856 PULLEY, fan 1
119 15H512 LABEL, control 1
120 15H204 KNOB, pressure 1
122 117560 SCREW, set, socket hd 1
125 247793 HOSE, inlet, coupled 1
126 255029 GAUGE, pressure, fluid, panel
mount
1
127 121320 ELBOW 1
129 255036 ELBOW, male 1
130★ 117792 GUN, grease 1
131★ 117773 GREASE, lubricant 1
132 15G782 HOSE, coupled 1
133 15G784 HOSE, coupled 1
134 116915 DIPSTICK with breather cap 1
135 247792 FILTER, oil,18-23 psi bypass 1
137 116793 FITTING 1
139 107156 SCREW, cap socket head 3
142 112586 SCREW, cap, hex hd 2
143 110996 NUT, hex, flange hd; 5/16-18 2
144 C19862 NUT, lock, hex 1
146 247836 COVER, access 1
147 255048 NUT, strain relief, M40 thread 1
148★ 255039 CONNECTOR, heater 1
150 SCREW, set; 1/4 x 1/2 (13 mm) 2
151 261821 CONNECTOR, wire, 6 AWG (pair) 1
153 104373 WASHER, thrust 2
160 PUMP, assy.; see page 57 1
161 255653 KIT, fluid inlet; each kit includes
161a-161d
2
161a VALVE, ball; 3/4 in. 1
161b NIPPLE, hex 1
161c Y-STRAINER 1
161d FITTING, union, swivel; 3/4 in. 2
162 KIT, skid 1
163 257543 KIT, caster; includes 4 casters 1
164 100060 SCREW, cap, hex hd 4
165 101044 WASHER, plain 4
166 100018 WASHER, lock, spring 4
167 100321 NUT 4
168 15W350 BRACKET 1
169 122400 ELBOW, bulkhead; #8 JIC 2
170 117502 REDUCER; #5 x #8 JIC 1
171✿ HOSE, moisture lock, assy., A; 3 ft. 1
172 122398 REDUCER; #6 x #8 JIC 1
173✿ HOSE, moisture lock, assy., B; 3 ft. 1
174 122401 ADAPTER, bulkhead; #8 JIC - #6
nptf
2
175 111856 ELBOW, street; 3/8-18 npt 1
176 155677 ADAPTER, union,90 deg.;
3/8 nptf x 3/8 npsm
1
177 15X244 HOSE, coupled; 5600 psi 2
180 15X710 GUARD 1
181▲ 15W800 LABEL, warning 1
182▲ 15W349 LABEL, caution, pinch point 16
183✖ PIN, base, fluid pump 2
184✖ PIN, hitch 14
185 15X743 HANDLE, round 2
186 GC2108 WASHER, lock, spring, #10 4
Ref. Part Description Qty.
187 GC2188 SCREW, socket hd 4
188 GC0530 LABEL, calibration, right 2
189 GC0531 LABEL, calibration, left 2
190 GC0541 KNOB, clamping 4
191 GC1196 FITTING, lube; 1/8 npt 1
192 GC1139 SHAFT, guard 1
193 GC1126 EXTENSION, standoff, hex; 1 in. x
2 in.
4
194 GC1137 SHAFT, cylinder, hydraulic 1
195 GC2109 WASHER, lock, spring; 1/4 in. 4
196 100270 SCREW, cap, hex hd 4
197 GC2042 WASHER, flat, fender; 1/4 in. 4
198 FRAME 1
199 15W005 WIRE, switch, cable 1
Ref. Part Description Qty.